stop work

Define a stop-work trigger for 90-day review

A source-bounded executive hiring control note for executive hiring teams: 90-day review with clear ownership and evidence.

4 min readHireExecutiveTeam editorial
Define a stop-work trigger for 90-day review article illustration

The control this 90-day review needs

A busy executive hiring team can look productive while the 90-day review record is too thin to defend. The control starts with one question: can a second person reconstruct who asked, what source was used, who decided, and what changed?

Map the source before the task

If the answer is no, the work is not complete. The team may still be helpful, but it cannot show that the action was authorized or that the destination record was updated. This step applies to hireexecutiveteam-define-a-stop-work-trigger-for-90-day-review.

Make decision rights explicit

Write the control as a short operating rule for executive hiring teams, not as a general plea for better documentation. This step applies to hireexecutiveteam-define-a-stop-work-trigger-for-90-day-review.

Build a repeatable daily routine

Name a backup owner for leave and time-zone gaps. Coverage should be written into the routine. This step applies to hireexecutiveteam-define-a-stop-work-trigger-for-90-day-review.

Recover cleanly when the control fails

When evidence is unavailable, record that state instead of leaving a blank. Missing and confirmed negative are different. This step applies to hireexecutiveteam-define-a-stop-work-trigger-for-90-day-review.

Verify, review, and improve

Close the loop with the requester. Internal completeness without confirmation is only half closed. This step applies to hireexecutiveteam-define-a-stop-work-trigger-for-90-day-review.

Name the system or document that governs 90-day review

Name the system or document that governs 90-day review. Record the version, the observation time, and the field the source supports.

Do not treat a screenshot, a forwarded note

Do not treat a screenshot, a forwarded note, or a verbal confirmation as the record itself. These can be leads, but the owner still needs the governing source. This step applies to hireexecutiveteam-define-a-stop-work-trigger-for-90-day-review.

When sources conflict, keep both and label the conflict

When sources conflict, keep both and label the conflict. A clean summary that hides a disagreement is worse than an honest exception. This step applies to hireexecutiveteam-define-a-stop-work-trigger-for-90-day-review.

Do not copy a value because it looks familiar

Do not copy a value because it looks familiar. Reopen the source and record what changed. This step applies to hireexecutiveteam-define-a-stop-work-trigger-for-90-day-review.

Use a short reason code for each exception

Use a short reason code for each exception. The code should describe the evidence problem, not the person. This step applies to hireexecutiveteam-define-a-stop-work-trigger-for-90-day-review.

Record the 90-day review source and observation time

Record the 90-day review source and observation time. A later reviewer should be able to tell whether the value was current when the first action was taken.

The VA can prepare, compare, label, calculate, and route

The VA can prepare, compare, label, calculate, and route. The named owner decides whether the evidence is enough and what the customer or employee is told. This step applies to hireexecutiveteam-define-a-stop-work-trigger-for-90-day-review.

Write the boundary into the task, including the systems

Write the boundary into the task, including the systems the VA may touch and the fields they may change. This step applies to hireexecutiveteam-define-a-stop-work-trigger-for-90-day-review.

A complete packet is not approval

A complete packet is not approval. The owner decision should be visible in the record, with a time and a scope. This step applies to hireexecutiveteam-define-a-stop-work-trigger-for-90-day-review.

Close the loop with the requester

Close the loop with the requester. Internal completeness without confirmation is only half closed. This step applies to hireexecutiveteam-define-a-stop-work-trigger-for-90-day-review.

Review one 90-day review case end to end in the weekly meeting

Review one 90-day review case end to end in the weekly meeting. Check the source, decision, destination record, and confirmation.

Write the next action with an owner and a time

Write the next action with an owner and a time. "Review the exception" is not a next action; a named person checking a named source by a stated time is. This step applies to hireexecutiveteam-define-a-stop-work-trigger-for-90-day-review.

Start the day by opening the 90-day review queue

Start the day by opening the 90-day review queue and checking the oldest item. Work from the source, not from the previous summary.

Record the exception, the next action, the owner

Record the exception, the next action, the owner, and the due time before moving on. A note without a due time is not a handoff. This step applies to hireexecutiveteam-define-a-stop-work-trigger-for-90-day-review.

End the day by reconciling the queue

End the day by reconciling the queue. Explain what remains open and who owns the next check. This step applies to hireexecutiveteam-define-a-stop-work-trigger-for-90-day-review.

Record the 90-day review source and observation time

Record the 90-day review source and observation time. A later reviewer should be able to tell whether the value was current when the first action was taken. This step applies to hireexecutiveteam-define-a-stop-work-trigger-for-90-day-review.

If the rule changes, keep the earlier classification

If the rule changes, keep the earlier classification and apply the new rule to later cases. This step applies to hireexecutiveteam-define-a-stop-work-trigger-for-90-day-review.

Define a recovery path for missing sources, wrong owners

Define a recovery path for missing sources, wrong owners, stale versions, and partial updates. The path should stop dependent work until the record is safe. This step applies to hireexecutiveteam-define-a-stop-work-trigger-for-90-day-review.

Preserve the original request and the correction

Preserve the original request and the correction. Do not overwrite the first value to make the history look consistent. This step applies to hireexecutiveteam-define-a-stop-work-trigger-for-90-day-review.

If the failure affects pay, safety, access, legal, or a customer promise, route it to the owner immediately. This step applies to hireexecutiveteam-define-a-stop-work-trigger-for-90-day-review.

Write the next action with an owner and a time

Write the next action with an owner and a time. "Review the exception" is not a next action; a named person checking a named source by a stated time is. This step applies to hireexecutiveteam-define-a-stop-work-trigger-for-90-day-review.

Name a backup owner for leave and time-zone gaps

Name a backup owner for leave and time-zone gaps. Coverage should be written into the routine. This step applies to hireexecutiveteam-define-a-stop-work-trigger-for-90-day-review.

Close 90-day review only when the destination record shows

Close 90-day review only when the destination record shows the approved change. A sent message is not proof that the destination changed.

Review one case end to end each week

Review one case end to end each week. Check the source, the decision, the update, and the confirmation. This step applies to hireexecutiveteam-define-a-stop-work-trigger-for-90-day-review.

A repeated gap should change the procedure, the field

A repeated gap should change the procedure, the field, or the queue design, not only the coaching. This step applies to hireexecutiveteam-define-a-stop-work-trigger-for-90-day-review.

Keep the 90-day review queue separate from the general inbox

Keep the 90-day review queue separate from the general inbox. A queue without an owner hides the oldest item.

Do not copy a value because it looks familiar

Do not copy a value because it looks familiar. Reopen the source and record what changed. This step applies to hireexecutiveteam-define-a-stop-work-trigger-for-90-day-review.

Frequently asked questions

Who owns the decision?

The named executive or hiring owner keeps the decision; the assistant prepares and routes the record.

What evidence is kept?

Keep the source, instruction, output, reviewer, and next action.

Ready to define the role?

Use a recent leadership week to scope the support that would make the biggest difference. The consultation is a working conversation, not a generic pitch.

Book a consultation
On this page
  1. The control this 90-day review needs
  2. Map the source before the task
  3. Make decision rights explicit
  4. Build a repeatable daily routine
  5. Recover cleanly when the control fails
  6. Verify, review, and improve
  7. Name the system or document that governs 90-day review
  8. Do not treat a screenshot, a forwarded note
  9. When sources conflict, keep both and label the conflict
  10. Do not copy a value because it looks familiar
  11. Use a short reason code for each exception
  12. Record the 90-day review source and observation time
  13. The VA can prepare, compare, label, calculate, and route
  14. Write the boundary into the task, including the systems
  15. A complete packet is not approval
  16. Close the loop with the requester
  17. Review one 90-day review case end to end in the weekly meeting
  18. Write the next action with an owner and a time
  19. Start the day by opening the 90-day review queue
  20. Record the exception, the next action, the owner
  21. End the day by reconciling the queue
  22. Record the 90-day review source and observation time
  23. If the rule changes, keep the earlier classification
  24. Define a recovery path for missing sources, wrong owners
  25. Preserve the original request and the correction
  26. If the failure affects pay, safety, access, legal
  27. Write the next action with an owner and a time
  28. Name a backup owner for leave and time-zone gaps
  29. Close 90-day review only when the destination record shows
  30. Review one case end to end each week
  31. A repeated gap should change the procedure, the field
  32. Keep the 90-day review queue separate from the general inbox
  33. Do not copy a value because it looks familiar
  34. Frequently asked questions